FTE Maximal GENIUS PRO 200, Руководство пользователя

Страница: 76 / 100

User’s Manual · Genius
Reserved for technical modifications and/or errors
-
8
-
Genius Version en_1.5 FTE maximal
2.2.- 2nd Step: Menu Prog CH
To be able to access to this menu, the AGC function must be OFF.
In this screen you can configure with more detail the filters UHF.
The following options will appear on the screen:
- In: Indicate the selected input (non editable field).
- Mod: Indicate the filter (from 1 to 10).
- Level: Level of gain that we want to give.
- Type: Indicates the type of channels (analogue, digital or both)
- CH.B: Indicates the starting channel of the filter.
- CH.E: Indicates the ending channel of the filter.
- Fine: To fine adjustment of the frequency.
We will move through options with keys “Up” and “Down” of the keyboard.
Push CANCEL to go back to previous menu.
Programming:
We will move with “right” and “left” keys.
- Mod: 01 >> 02 >> 03 >> 04 >> .. >> 10 >> GIG >> AUX >> BI-FM >>
B3-DAB >> SAT.
- Level: 01 >> 02 >> .. >> 20. Gain level of the selected filter.
- Type: The programmable filters UHF can differentiate between
Analogue channels (ANA) and Digital channels (DIG). If the filter
combines both types of channels, you should select A/D.
- CH.B: (Channel Begin) Starting channel of the group of channels of the filter.
- CH.E: (Channel End) Ending channel of the group of channels of the filter. If you only need one channel in the
filter, you should select the same one than the CH.B.
The maximum allowed distance are six channels: 21-21 >> 21-22 >> .. >> 21-26.
The second number never can be lower than the first one, and the overlapping between filters connected to the
same input is not allowed.
- Fine: -9 >> -8 >> .. >> 0 >> 1 >> .. >> 9
Alter programming all the UHF filters, the Global Gain of the bank of filters is
represented: GIG. This menu modifies the level equally to all the filters. This
attenuator is the one that is controlled by the AGC when it is enabled. Due to
that, it is highly recommended that never configure the extreme values when
AGC is being used.
The margin of available values is between 1 and 20, but you should leave
them between 4-17 to allow a margin variation to the AGC.
Press CANCEL to go back to previous menu.
21-21 21-22 21-26
GENIUS ICT
Inputs Back-up
>Prog CH< Info
Auto Standard
GENIUS ICT In:UHF1
>Mod: 01< CH.B: 21
Level:10 CH.E: 22
Type:DIG Fine: +1
GENIUS ICT IN:GIG
Mod:GIG
>Level:10<
GENIUS ICT In:UHF1
Mod: 01 CH.B: 21
Level:10 >CH.E: 22<
Type:DIG Fine: +1