FTE Maximal 2008600, Быстрое руководство по установке

Страница: 23 / 27

Quick installation Guide
ATLAS
Reservado el derecho para modificaciones técnicas y/o errores
-
9
-
ATLAS Versión en_10 Fte maximal
5. Example of configuration
Follow the next steps to configure the transmodulator. The RF IN is connection a LNB universal and the transmodulator
supply the LNB. The transmodulator and the computer are connected and in the web browser appear the Web interface.
1 Do a left click of the mouse in the link RF on the section “ Input” of the Left menu bar.
2 In the section with the title “LNA/LNB settings” select “ Mode” and chooses the option “ LNB/Multiswitch” .
3 Select in “ LNB Type” the option “ Universal (9750/10600)”. The tone 22 KHz will be set or not by the tuner
frequency.
4 Uncheck the option “The LNB / Multiswitch are being controlled by another device” .
5 Choose in “ Polarization /Voltage ” 13V or 18V . In our example the value is “ 13V” .
6 In the parameter “ SAT” select “ A ”.
7 Press the button “Apply” to confirm the changes of the section “LNA/LNB settings” .
8 Move down in the web page using the scrollbar in the right until show the options of “Tuner settings”.
9 Select in “ Type” the option DVB-S(2 ).
10 Type in “Frequency (KHz)” the center frequency in KHz of transponder. In the example 11626 MHz will be
11626000 KHz.
11 Typing in the field “Symbol rate (Kbaud)” the value of the Symbol rate of the transponder- In the example will be
22000.
12 Press the button “Apply” to update the changes in the section “Tuner settings”. Check the lock is green to verify
the tuner is locked.
13 Do a left click in Output> RF in the menu of the left .
14 Move down until show the section “ Modulation Settings”
15 Select in the option “Type” the value “DVB-T” .
16 Type in “Frequency (KHz)” The center frequency of the channel in KHz. In
the example the value is 474000. Show the Annex 1 in the page 10 for detail.
17 Select the Bandwidth of the channel in Bandwidth . For example 8 MHz.
29 In our example is assigned the maximum capacity of the mux. Constellation”
64QAM, “ Code rate” 7/8 and “ Guard interval” 1/32. “ Mode” is set to 8K.
30 The output level value will be between 57 dBµV and 102 dBµV. In the
example set the value 102 dBµV.
18 In the Option “ Select the PIDs that should be” select the value “ removed
(ideal for large number of service)” . All the service will be marked and we
only need removed the service we don’t use in our installation.
19 Press “Apply” to save the changes in “ Modulation Settings”
20 Move down until show he section “ Transport stream Settings”.
21 If needed use LCN check the setting “User stream settings”. Setting the
country in the option “ Country” to set directly the values of “ ONID” and
“Private data”. If your country is not in the list use user define,
22 Press “Apply” to save the changes in the section “ Transport Stream
Settings”.
23 Select the output services in “Services Settings” . Uncheck the fields in
the columns “Enabled” of the services will be not distributed in the
output.
24 In the column “ LCN” could be assigned the Logical channel number of
the services .
25 Press “Apply” to save the changes in the section “Services Settings” .
26 Move up in the Web page to see the section “ Status”. Check the bar
“Bitrate” and avoid the bar will be painting in red. If the current bit rate
will be higher than the maximum bit rate of the output. The indication
“
overflow” will be painting red to indicate an error.