User’s manual · PVR T150
Technical changes and mistakes reserve
-
31
-
PVR T150 Version 1.1
FTE Maximal
Chapter 9 Installation
Over this menu you can search for new channels
Channel Search
,
modify the frequency list
MUX Management
, or make backups.
9.1. Antenna power
If you use this receiver with an active antenna DVB-T, you can give it directly
5 V for feeding it.
For this select with the buttons
the line
Antenna power
and then press
OK
.
Select now with
the line
5V
and then press
OK
.
9.2. Channel Search
With this menu you can also start searching new channels
This process has been described on page 12.
9.3. MUX Management
Here you can modify the frequency list of the channels. In normal conditions,
you do need no handling.
Delete Frequency
If you want delete one frequency, you can do it with the
Red
button
Delete
.
Doing it, you will see now one symbol like the one at the right side.
You can mark more than one lines, all of them will be deleted when you close the
MUX Management
.
Edit / Add Frequency
With the
Green
button
Edit
you can modify one frequency,
and with the
Yellow
button
Add
you can add one new frequency .
The use of
Add
and
Edit
is the same.
Please input here the middle frequency of one carrier.
Example:
CH 26 is from 510 up to 518 MHz
The correct frequency is 514MHz
In the line BW you have to select the bandwidth for this frequency.
Normally is in VHF band 7MHz, and in UHF 8MHz.
If everything is done, press
OK
button.
