Section 4
Evaluation
24
FT702LT Flat Front Wind Sensor Manual
Figure 18: Acu-Vis Heater Controls
4.3 FT054 Evaluation Cable
The FT702LT can be tested by connecting it to a computer. Figure 19 shows how the Evaluation Pack can be
quickly set up to evaluate the sensor using Acu-Vis.
Figure 19: Evaluation Cable
4.4 Quick Start Steps
1. Insert the Acu-Vis CD in to the PC and install Acu-Vis, by running the setup.exe file.
Figure 20: Acu-Vis Install Files
2. Remove the FT702LT sensor and FT054 cable from their packaging and mate the connectors together.
3. Connect the +24 VDC terminal of the power supply (current limit set to 6A) to the white wire (Red test
plug) and 0V terminal to the brown wire (black test plug). Then switch on the power supply.
