FSR RN-410 Series Скачать руководство пользователя страница 9

9

WARRANTY AND RETURN INFO

WARRANTY POLICY

This product is warranted against failures due to defective parts or faulty workmanship for a period of one year 
after delivery to the original owner. During this period, FSR will make any necessary repairs or replace the unit 
without charge for parts or labor. Shipping charges to the factory or repair station must be prepaid by the owner,  
return-shipping charges, via UPS / FedEx ground, will be paid by FSR.

This warranty applies only to the original owner and is not transferable. In addition, it does not apply to repairs 
done by other than the FSR factory or Authorized Repair Stations.

This warranty shall be cancelable by FSR at its sole discretion if the unit has been 
subjected to physical abuse or has been modifi ed in any way without written authorization from FSR. FSR’s 
liability under this warranty is limited to repair or replacement of the defective unit.

FSR will not be responsible for incidental or consequential damages resulting from the use or misuse of 
its products. Some states do not allow the exclusion of incidental or consequential damages, so the above 
limitations may not apply to you. This warranty gives you specifi c legal rights, and you may also have other 
rights which vary from state to state.

Warranty claims should be accompanied by a copy of the original purchase invoice 
showing the purchase date (if a Warranty Registration Card was mailed in at the time of purchase, this is not 
necessary). Before returning any equipment for repair, please read the important information on service below.

SERVICE AND RETURN AUTHORIZATION

Before returning any equipment for repair, please be sure that it is adequately packed and cushioned against 
damage in shipment, and that it is insured. We suggest that you save the original packaging and use it to ship the 
product for servicing. Also, please enclose a note giving your name, address, phone number and a description of 
the problem.

NOTE: All equipment being returned for repair must have a Return Authorization (RMA) Number.

 To 

get a RMA Number, please call FSR Service Department (973-785-4347). 

Please display your RMA Number prominently on the front of all packages.

CONTACT INFORMATION

FSR Inc.
244 Bergen Boulevard, 
West Paterson, NJ  07424 

Tel: (973) 785-4347 · Fax: (973) 785-4207

E-Mail: [email protected] · Web: http://www.fsrinc.com 

Содержание RN-410 Series











Отзывы: