FSR MAS 4100A, Инструкция по установке и эксплуатации

Страница: 10 / 18

10 MAS 4100A Scaler/Swicher
FRONT PANEL CONTROLS
The MAS 4100A is controlled via Front Panel Push Buttons, Infrared Remote Control or
RS-232. Front Panel LED’s and an On Screen Display provide status indications. The
following photo shows the Control Buttons and LED Indicators.
NOTE:
A “No display” situation can occur as a result of the user inadvertantly selecting the wrong output
setting. This will hide the setup menus from the user making it inpossible to view the on screen
adjustments The procedure below can return the unit to the previous output setting.
Press and hold the "MENU" button for 5 seconds to activate the HD-15 VGA output
Press and hold the "ENTER" button for 5 seconds to activate the 5 BNC VGA output
Input Selection
Pressing the desired INPUT SELECT button directly selects the input signal and its
related Front Panel LED will illuminate:
Button Selects
C-VIDEO Composite Video Input
S-VIDEO S-Video Input
YCbCr YCbCr Component Video Input
PC Bypass Mode
Output Resolution Select
Pressing the desired OUTPUT RESOLUTION SELECT button steps through all options selecting
the output signal type and resolution. As it steps the related Front Panel LED will illuminate.
Resolution Composition Scan
VGA 640x480 RGBHV Progressive
SVGA 800x600 RGBHV Progressive
XGA 1024x768 RGBHV Progressive
SXGA 1280x1024 RGBHV Progressive
WXGA 1280x768 RGBHV Progressive
480p/YPbPr 852x480 YPbPr Progressive
576p/YPbPr 852x576 YPbPr Progressive
720p 1280x720 RGBHV Progressive
1080i 1920x1080 RGBHV Interlaced
WXGA 1365x768 RGBHV Progressive