FSR
MDC – MK1 Operations Manual [
Page 17 of 28
]
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
STORE
This button is used for saving new settings to the unit's memory and will be remembered even after the
unit has been switched off.
U. SCAN / O. SCAN
(Underscan / Overscan) will toggle you between Underscan and Overscan modes.
FREEZE
The Freeze function allows you to freeze the current image on the screen, and all the settings of the
unit itself. Pressing the freeze button again will unfreeze the image.
AutoSet
This powerful feature will scan the incoming computer image to determine its size and position. This
will optimize it for display on the desired TV unit.
§
If the AutoSet feature does not look like it is finding the edges of the display correctly, then you
can press RESET to stop it going any further.
§
See the 'MANUAL SET' option later in this section for details on how to manually adjust this
feature.
FILTER
This button will toggle between 4 and 6 line flicker reduction modes.
SIZE & POSITION
These buttons allow you to adjust the Underscan or Overscan size and position on the TV (whichever
is currently selected). You can then use the arrow keys to adjust the horizontal and vertical size or
position of the image being displayed.
Please Note: You should do an AutoSet before making these adjustments. This way the unit knows
the size of the "incoming" computer image.
§
Only SIZE or POS. is active at any one time, but you can easily switch from one to the other.
§
Once adjusted, STORE the setting for future use.
ZOOM
Enter the Zoom function by pressing ZOOM on the IR remote control. Pressing ZOOM again will
return you to the normal viewing size.
§
You can adjust other settings while in Zoom mode.
§
You may need to press the PAN button to restore control over the Zoom position, after adjusting
other settings.
