FSR HD-H70-SP-Rx, Руководство пользователя

Страница: 11 / 24

11
ID Name Description

RS-232 pass through capability enabled

Firmware cannot be updated.
Update:

RS-232 pass through capability disabled

Firmware can be updated.
Hardware Installation
Warnings

Before the installation, disconnect the power supply from all the
devices.

Do not connect or disconnect cables from the Transmitter and
Receiver when they are powered on. To connect or disconnect
cables from the units, power them off first.

For best resolution and ESD performance Shielded CAT6A in a TIA
/ EIA 568B wiring configuration is recommended.Please use care
when installing, connecting and disconnecting cables.
1. Connect the source to
HDMI IN
on the Transmitter via an HDMI cable.
2. Connect an IR emitter cable to
IR OUT
and an IR receiver cable to
IR IN
on
transmitter.
3. Connect a Display to
HDMI OUT
on Receiver.
4. Connect an IR emitter cable to
IR OUT
and an IR receiver cable to
IR IN
on
the Receiver.
5. Connect
HDBT OUT
on the Transmitter to
HDBT IN
on the Receiver via a
shielded CAT5e / CAT6 / CAT6A / CAT7 cable.
6. Connect the power supply to either the transmitter or receiver.