15
Connection Request
The
connection
request
is
used
to
connect
one
of
the
two
available
inputs
to
the
output.
A
connection
may
be
disconnected
by
using
the
DIS
command
(see
later
in
document).
CON
input
|
"?"
<cr>
Syntax:
CON
<input
|
"?"><cr>
Where:
CON
Connection
request
header
input
Input
number
in
the
range
1
‐
2
"?"
Request
to
return
the
currently
selected
input
(the
front
panel
LEDs
reflect
the
currently
selected
input).
(Note:
A
CON
input
command
will
override
the
disconnected
output,
ie
via
the
DIS
command.
See
below
for
description
of
DIS
command.)
Examples:
To connect input 2 to output, the connection request would look like this:
CON
2
<cr>
To request the currently connected input, the connection request would look
like this:
CON
?<cr>
The response from the switcher would be:
CON 2<cr><lf>
If a previously connected input were subsequently disconnected via the DIS
command, then the CON ? command will return the currently selected input.
