Background Music System (BMS 1032)
Installation and Operating Manual
FSR
7-4
www.fsrinc.com
3 - PAGE VOLUME ON A SCALE FROM 0 TO 9.The PAGE VOLUME applies to the audio vol-
ume for both PAGES.
4 - LOCAL AUDIO SOURCE enable/disable.
There is a separate menu available for each when the wall plate is placed in the PROGRAMMING
MODE. Once programming is complete the program enable switch on the rear of the rack unit should be
set to “DISABLE”.
ENTERING PROGRAMMING MODE AT WALL PLATE.
The simultaneous pressing of the VOLUME DOWN and the CHANNEL DOWN keys at the wall plate
will cause the wall plate to enter the PROGRAMMING MODE,
if it is ENABLED at the RACK Unit
. If
the wall plate is DISABLED the character “d” will be displayed for about one-third second, or as long as
the user holds down the two programming keys.
ACCESSING THE PROGRAMMING MENUS.
When the PROGRAMMING MODE is entered initially it will immediately display Programming Menu 1
as; P 1 value where Value = 1 or 0. and 1 = enabled 0 = disabled. The characters “P 1 “ flash sequential-
ly and the value is displayed for 2 seconds. This continues until one of five events occurs:
1 - the user hits the VOLUME UP key which toggles the value from 1 to 0 or 0 to 1,
2 - the wall plate “times-out” and exits programming mode after two minutes if no keys are
pressed,
3 - the Wall plate enters the PAGING MODE,
4 - the user hits a menu scroll key( CHANNEL UP or CHANNEL DOWN,)
5 - the user hits the VOLUME DOWN and CHANNEL DOWN keys simultaneously to exit PRO
GRAMMING MODE.
MENU SCROLLING KEYS:
The CHANNEL UP KEY will cause Menu 2 for PAGE 2 to display as; P 2 value where Value = 1 or 0.
The flashing sequence and duration of the display for PAGE 2 is the same as PAGE 1.
The scrolling sequence for the CHANNEL UP key is :
P1 (PAGE 1), P2 (PAGE 2), U (PAGE VOLUME), L (LOCAL).
The CHANNEL DOWN key operates to move in the reverse scrolling order, so that if Menu 4, LOCAL is
displayed a CHANNEL DOWN key will cause Menu 3, PAGE VOLUME to be displayed.
