English - 23
FSN1949 - 4/2014
Troubleshooting
Problem
Possible Solution
No power
Check fuse in AC Inlet. If fuse has failed, replaced with similarly rated
new part.
Will not record
Verify that there is sufficient space available on the internal disk.
No response from MDVR
Re-boot the system.
Disc or USB failure
Make sure that the media being used is not write protected.
Verify that there is sufficient space available on the media.
Erase unnecessary files or replace the disc.
Cleaning Instructions
Precautions
Before cleaning, turn power off. Do not apply or spray cleaner directly onto the cabinet as excess
liquid may cause damage to internal electronics. Instead, apply the cleaner to the cloth first.
Follow your hospital protocol for the handling of blood and body fluids. MDVR is not disinfected
or packed in a sterile environment. Follow your hospital protocol in case MDVR needs to be disin-
fected prior to installation.
Cleaning
Remove dust with a dry, lint‐free, non‐abrasive soft cotton cloth. Remove fingerprints or grease
using a lint‐free, non‐abrasive soft cotton cloth that is lightly moistened with plain water or a
mild commercial cleaning product suited for appliance surfaces. Gently wipe dry with a dry cloth.
The following products are tested and approved:
Misty Clear Lemon 10 Disinfectant
Bohle glass cleaner
Zep Heavy‐duty glass & all surface cleaner
Klear Screen
Screen TFT (Kontakt Chemie)
Incidin Foam (Ecolab)
Microzid
Mild detergent
Isopropyl alcohol with concentration < 5%
Household bleach
(generic sodium hypochlorite, solutions of 5.25% sodium
hypochlorite diluted with
water between 1:10 and 1:100)
Do NOT use:
•
Alcohol/solvents at higher
concentration > 5%
• Strong alkalis, strong solvents
• Acid
• Detergents with fluoride
• Detergents with ammonia
• Detergents with abrasives
• Steel wool
• Sponge with abrasives
• Steel blades
• Cloth with steel thread
