FSK Falcon Global, Руководство по установке и эксплуатации

Страница: 8 / 32

3.1.1 Power Supply
The Falcon Global must be connected to a stable 12V DC
(nominal 13.2V) power supply. If a battery is available in the
alarm panel, it must preferably be powered directly from the
battery.
3.1.2 Check AC
The Check AC (CAC) input detects the presence of the AC
supply and is used to check for AC power failure. The CAC line
should be connected to one of the transformer's SECONDARY
terminals. DO NOT connect this line to the mains.
The CAC input will detect AC voltages between 10 and 24V.
If the CAC line is not connected, the Falcon Global should not be
programmed to send AC Failure or Restoral Signals.
The AC Failure and AC Restore signals have a programmable
delay (default set at 1 minute) in order to prevent false triggers.
3.1.3 Dry Contact Inputs
The dry contact inputs can be used to detect alarms generated
from the outputs of the alarm panel or from other sources.
If the external device generates the alarm by pulling the input to
ground (negative trigger), the pull-up jumper should be inserted
on the input of the Falcon Global.
GLOBAL
I Falcon Global Installation and Operation Manual 8