V1.0 2013
Accessories and Applications
AdjustableL&ZBracketispartoftheMEM2400LEDKit.
4
174
174
41
50.5
45
Trouble Shooting
Incorrect voltage.
Check voltage jumper setting.
Check power and loose wiring.
No DC voltage to lock.
Door will not lock
Too much back
pressure when
power is off
PROBLEM
POSSIBLE CAUSE
SOLUTION
Incorrect wiring connection.
Security top sleeve nut higher than
magnet surface.
Back pressure exerted on the MEM lock
not allowing the magnetic lock to retract
back to its original position.
Avoid applying continuous pressure on the door when
closed. Realign the door.
Screw fix the security top sleeve nut level with surface
with the provided key screw and apply thread-locker-glue.
Check wiring, refer to wiring instruction.
