Note: Parts & Components may vary. This picture is for display purposes only.
Note: Some models may include this fitting:
Working with Quick Connect Fittings
Quick connect fittings are very quick and extremely easy to use once you know how. Ensure all water tubing is
cut with a clean straight edge so it does not damage the quick connect fitting once inserted. To install simply
push the water line firmly into the quick connect fitting. To remove water line from quick connect fitting
simply depress the outer collar on the fitting and pull the water line out. If you do not depress the collar you
WILL NOT remove the water line.
Note: Parts and components will vary.
This picture is for display purposes only
Mounting the Purification System
1. Mark screw locations at the desired positions. Use the two holes on back of purification assembly mounting
bracket for marker guides.
2. Screw wood screws - Not supplied with unit, into marked positions. Leave screw heads out a little.
3. Mount purification system onto screws
Installation of Faucet
1. Using a small drill bit, drill a pilot hole.
2. Using the 11mm drill bit, drill a hole through the base metal. Operate the drill slowly and carefully,
especially when the drill is about to penetrate the metal. If necessary use a drop or two of oil in the hole.
If so – this fitting is designed to replace
the chrome adaptor block and chrome
ball valve tap pictured above.
