- 4 -
Sets the ports that connect DHCP server, default gateway and other ARs
respectively to be trusted.
Switch_config_g0/1#dhcp snooping trust
(4) If the downlink host A of VLAN 1 is manually configured IP and default gateway,
the IP address is 192.168.2.102 and the MAC address is 6c-62-6d-59-18-b7. The default
gateway, 192.168.2.1, enables MACFF to take effect. (If the client is not configured
manually, this step will not be performed)
）
Switch_config#arp 192.168.2.1 00:e0:0f:17:92:ed
Switch_config_g0/1#ip source binding 6c-62-6d-59-18-b7 192.168.2.102
interface GigaEthernet0/1
Switch_config_g0/1#macff vlan 1 default-ar 192.168.2.1
(5) Specify a physical port in MACFF-enabled VLAN to shut down MACFF.
Switch_config_g0/1#macff disable
(7) Configures other ARs that are in the same network segment of client. MACFF
allows the client to perform direct access without the help of gateway. (the ports where
other APs are should be set to trusted ports)
Switch_config_g0/1#macff disable
www.fs.com
S5500-48T8SP MACFF CONFIGURATION GUIDE
