EN
OCS409 User manual
5
Initial operation
The OCS409 is delivered in a configuration, which enables you to receive 9 transponders of
ASTRA
19
.
2
◦
east.
Therefore you have to connect the inputs of OCS409 as followed:
•
Input 1 = vertical, Low-Band
•
Input 2 = horizontal, Low-Band
•
Input 3 = vertical, High-Band
•
Input 4 = horizontal, High-Band
If you use Quad-Switch-LNB, the assignment is unimportant, because the control voltage put-
ted out refers to the right polarisation plane.
Below you can find all listed programs that you can receive without doing any transponder
search.
By this an immediate
function control
of OCS409 is possible.
For configuration of additional transponders, please follow instructions in chapter
.
!!! Please do not forget to terminate LNB outputs by provided resistors. !!!!
5
INITIAL OPERATION
9