background image

Operation Instructions

1. Power On/Off and Auto-off Function

Press        button to turn on the instrument. Press it again for 2 seconds or more to turn 

off the instrument. 

This light source has a power-saving function. If 10 minutes without any operation, the 

instrument will automatically shut down. If you need to disable this function, only need 

to press the        button for 2 seconds when you turn on the instrument till it displays

 “PERM”.

2. Backlight Function

When the instrument is powered on, short press        button, you can control the 

backlight function on or off. The backlight function supports you to use the light source 

at night or darker occasions.

3. Select Wavelength

After pressing         button, you can select the required output wavelengths.

The power meter or other measuring instrument should select correspond wavelength

of light source.

4. Modulation Output

After pressing         button, you can load a modulation current output laser.

This instrument has 3 modulations for selection: 270Hz, 1KHz, 2KHz.

5. Wavelength Identification

Press        button, the light source will output with wavelength ID and LCD will display 

“ID”. If work with the paired power meter with WAVE ID function, the optical power 

meter will change to the same wavelength automatically.

MOD

ID

Содержание FOLS-201













Отзывы: