Step 3: Open a browser, type
http://192.168.1.1
, and enter the default username and password,
admin/admin
.
Step 4: Click sign in to display the web-based configuration page.
Step 1: Connect a computer to the switch's console port using the supplied console cable.
Step 2: Start the terminal simulation software such as HyperTerminal on the computer.
Step 3: Set the parameters of the HyperTerminal: 115200 bits per second, 8 data bits, no parity, 1 stop
bit and no flow control.
Step 4: Enter the default username and password,
admin/admin
.
Configuring the Switch Using the Console Port
x
Quick Connect
Protocol:
Serial
Flow Control
DTR/DSR
RTS/CTS
XON/XOFF
Save session
Show quick connect on startup
Open in a tab
Connect
Cancel
COM3
115200
8
None
1
Port:
Baud rate:
Data bits:
Parity:
Stop bits:
Name of pipe:
