Frymaster FilterQuick Version 2 Скачать руководство пользователя страница 38 | Manualshive

Страница: 38 / 42

Frymaster FilterQuick Version 2 Скачать руководство пользователя страница 38

3-2

Left Display

Right Display

Action

TPM

With the desired stats displayed, press



.

Current Day

Current Date

Press



to view TPM.

TPM

Number/– –
Current Day

Press



to scroll for last measured TPM value that day. Press



.

NOTE:

If OQS is not installed; or invalid or no reading is taken, dashed lines are

shown.

TPM

Number/– –
Current Day

Press



to scroll to TPM values for the previous week. Press



to view dates.

Exit Exit

Press the Scan button twice to return the controller to OFF.

3.3

OQS Filter Menus

To access the OQS Filter menu options follow the steps below. All are accessed by pressing and holding the Filter button
until the controller displays Filter Menu. If fryer temp is below 300°F the, controller displays “WAIT FOR FILTER”. The
controller must be on and at or above 300°F to execute a Clean and Filter, an OQS filter. All messages need to be confirmed
or cleared on all controllers prior to starting any filtration process.

Entering Filter Menu Mode

Left Display

Right Display

Action

READY READY

Press the FILTER button until FILTER MENU is displayed for three seconds
changing to FILTER.

FILTER

Press



to scroll to Clean and Filter, OQS or Exit. With the desired choice

displayed press



.

Follow instructions on the following pages to navigate the

modes. If the filter pan is not fully engaged, the controller displays INSERT
PAN

.

Once the filter pan is pushed fully into place, and the MIB board

displays an “A”, the filter function continues

.

3.3.1 Clean and Filter with OQS (Set to Number)

Left Display

Right Display

Action

Follow steps to Entering Filter Menu Mode above in section 3.3.

LEFT

(Split vats only)

RIGHT

(Split vats

only)

Press appropriate arrow to select side.

CLEAN AND
FILTER

Press



.

CLEAN NOW?

YES / NO

Press (YES) arrow to continue. Press (NO) arrow to cancel and
return to previous state. See section 1.9.2 for additional
information.

SKIM VAT

Skim the vat.

START
FILTRATION

Press button with blinking LED.

DRAINING

None required. If the drain becomes clogged, use the Fryer’s
Friend to clear the blockage

CLEAN OIL
SENSOR

CONFIRM

(Gas Only)

Clean oil sensor with a no scratch pad and press

arrow under CONFIRM.

FLUSHING

Use brush and hot oil to wash down crumbs and residue from the
frypot walls and foam deck. Use no scratch pad to remove
residue. Frypot surface will be hot, use thermal gloves and
extreme care.

SCRUB VAT
COMPLETE?

CONFIRM

Press arrow under CONFIRM.



NOTE: This step may be

shown if CHOICE is selected in setup.

OQS FILTER

YES / NO

Press (YES) arrow to continue. Press (NO) arrow to advance to
the POLISHING step below. (Follow the arrows to the left.)
NOTE: This step may be shown if CHOICE is selected in setup.

«
...
36
37
38
39
40
...
»

Содержание FilterQuick Version 2











































Отзывы:

Нет отзывов