manualshive.com logo in svg

Frye FONIX FP35, Краткое руководство пользователя

Поделиться
Скачать
Frye FONIX FP35 Скачать руководство пользователя страница 44

40

 

FONIX FP35 Quick Reference Guide

4.5.1  Viewing the SPL Display

The information on the SPL screen is similar to the information in the other real-
ear measurement screens. However, in addition to the measurement curves and the 
SPL-converted target, the SPL Screen also displays SPL-converted thresholds and 
uncomfortable levels, allowing you to directly compare the measurement curves to 
the audiometric information.

X denotes left thresholds
O denotes right thresholds

*

 denotes the target

U denotes the uncomfortable levels.

Figure 4.5.1—SPL display

4.5.2  Running an SPL Test

This section assumes you have already entered the client’s audiometric data in the 
Audiogram Entry Screen, and that you have generated a target. See Section 4.3.3 and 
4.3.4 for more details.

1.  Place the probe tube into the client’s ear following the instructions provided in 

Section 4.2.4.

2.  Insert the aid into the client’s ear, being careful not to drag the probe tube farther 

into the ear canal (See Figure 4.2.4C). Do not turn the aid on.

3.  Instruct the client to remain still when the signal is on.
4.  Press [F5] and [START/STOP] to level.
5.  Have the client turn the aid on and set the gain control to the normal use level.

Содержание FONIX FP35























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды