Tools - Device Setup - General Setting Details
The general settings allow you to configure high level functionality of the SATS-MINI. These are:
●
Configuration Name - Enter for example your Drone name and other information that describe the
setup.
●
Primary (UP) Axis - This lets you capture the current SATS position and define this as UP. Mount the
SATS-MINI on your drone and with the drone level, and pointing to magnetic north press Acquire to
capture the IMU orientation that defines the drone up (Z) axis.
●
Safety Altitude (m) - Enter the altitude where below this the SATS is in Safety, and above the SATS-MINI
will go to armed. Entering 0 disables this feature. Units are meters.
●
Supply Power Auto-Shutdown - Is enabled this causes the SATS-MINI to automatically turn off after a
delay of XXX seconds after power removal. Use this to automatically allow the SATS-MINI to turn on,
and also turn off bases on the external 5V power supply. (Software V1.0.29 and above)
●
Flight logging options - Log Frequency, Terse Logging, Auto-Erase Log. These are prescribed below.
© Fruity Chutes Inc - https://fruitychutes.com
