background image

                                              FrSky Electronic Co., Ltd                    www.frsky-rc.com                    Contact us : [email protected]  

Add:F-4,Building C, Zhongxiu Technology Park, No.3 Yuanxi Road, Wuxi, 214125, Jiangsu, China    Technical Support: [email protected] 

                                              FrSky Electronic Co., Ltd                    www.frsky-rc.com                    Contact us : [email protected]  

Add:F-4,Building C, Zhongxiu Technology Park, No.3 Yuanxi Road, Wuxi, 214125, Jiangsu, China    Technical Support: [email protected] 

Instruction Manual for ESC Neuron 40/60/80

Instruction Manual for ESC Neuron 40/60/80

Programming parameters

The configuration method based on the operation manual for BLHeli_32 ARM is only for reference. For more 

detailed  information,  please  refer  to  the  original  BLHeli  manual  carefully.  Due  to  firmware  update  or  other 

reasons, the descriptions for functions may differ, so please take the official BLHeli manual as standard.

Rampup Power can be set to relative values from 3% to 150%. 3% is the 

minimum power to start the engine and 150% is the maximum power to 

operate the motor normally. 

Temperature protection can be disabled or enabled and temperature 

threshold can be programmed. The measured maximum temperature is 

different because the hardware are not the same.

 

 

 

 

 

   

 

S

5V

GND

Introduction

Thank you for purchasing FrSky ESC Neuron 40/60/80. The ESC has high performance processor and supports 

optional Dshot signaling and SBEC voltage can be adjusted through LUA (Sbec_v1.0.lua). In order to fully enjoy 

the benefits of the products, please read the instruction manual carefully and set up the device as described 

below.

Never connect the 5V output from USB adapter to ESC, or ESC will not work normally.

FrSky 

ESC Neuron 40/60/80

 supports programming parameters through USB Adapter. USB Adapter is 

not included in the package.Users could buy BLHeli USB Linker on your own.

The connection diagram is below.

Overview

59

33

Right

BEC 5~8.4V

PWM

S.Port

GND

Features

 Smart Port enabled

  Telemetry data for ESC: Voltage, Current (Resolution 125mA, Precision ±2%), RPM, Power Consumption, 

  Temperature.

  Telemetry data for SBEC: Output Voltage, Current (Resolution 50mA, Precision ±2%)

 High performance 32-bit micro-processor

 Over-temperature and over-current protection

 Optional Dshot signaling (Dshot 150/300/600)

 SBEC Supports 7A@5~8.4V (adjusted through LUA )

Neuron XX

Model Name

Size (L×W×H)

LiPo cells

SBEC

Cont. Current

Weight

Peak Current

Neuron 40
Neuron 60
Neuron 80

3~6S
3~6S
3~6S

5~8.4V
5~8.4V
5~8.4V

40A
60A
80A

60A

100A
120A

59*33*17mm
59*33*17mm
59*33*17mm

Specifications

58g
58g
58g

40/60/80

Connection Diagram

Battery

ESC

Motor

40/60/80

Receiver

Отзывы: