10
Registering your Microphone with the AP Receiver
Both Pendant and Pass-Around microphones must be registered with
the ezRoom’s
AP Receiver (the
‘receiver’)
to become operational. You will need:
Access to the
receiver’s
registration button (i.e. wall controller with programmed button,
receiver’s
Mic Registration
button or CM-
900’s webpage.)
Unscrew microphone battery door with supplied Phillips head screwdriver.
Supplied registration pin or straightened paper clip
Registration setup:
1. Press
the receiver’
s Registration button. Beacon
(if present) will flash blue for the duration of the
registration process.
2. Insert the registration puinto the hole next to the
battery connection. Press and release. You will hear
a low-high tone. Both LEDS will flash.
3. Registration is complete when the microphone’s
wireless indicator double flashes green, another
tone is heard and the beacon turns white.
4. Your microphone is now ready for use with this
ezRoom receiver. Unmute the microphone and
speak.
NOTE:
You only need to register a microphone once with the
ezRoom’s receiver
.
You can register up to 7 microphones to a single receiver.
If you go out of range, re-connect by pressing the microphone mute button.
To de-register a microphone from receiver, place the microphone in the charger, access the CM-
900’s ‘Mic Info’ webpage and press the corresponding ‘Delete’ button.
Registration
button access
hole
