TO THE DEALER:
Assembly and proper installation of this product is the responsibility of the Frontier dealer. Read manual
instructions and safety rules. Make sure all items on the Dealer’s Pre-Delivery and Delivery Check Lists in the
Owner’s/Operator’s Manual are completed before releasing equipment to the owner.
The dealer must complete the Warranty Registration located on the Frontier website.
TO THE OWNER:
Read this manual before operating your Frontier equipment. The information presented will prepare you to do a
better and safer job. Keep this manual handy for ready reference. Require all operators to read this manual care-
fully and become acquainted with all the adjustment and operating procedures before attempting to operate.
Replacement manuals can be obtained from your Frontier dealer.
The equipment you have purchased has been carefully engineered and manufactured to provide dependable and
satisfactory use. Like all mechanical products, it will require cleaning and upkeep. Lubricate the unit as specified.
Observe all safety information in this manual and safety decals on the equipment.
For service, your authorized Frontier dealer has trained mechanics, genuine Frontier service parts, and the neces-
sary tools and equipment to handle all your needs.
Use only genuine Frontier service parts. Substitute parts will void the warranty and may not meet standards
required for safe and satisfactory operation. Record the model number and serial number of your equipment in the
spaces provided:
Model:____________________________________ Date of Purchase:_________________
Serial Number:
(see Safety Decal section for location)
___________________________________
Provide this information to your dealer to obtain correct repair parts.
Throughout this manual, the term
IMPORTANT
is used to indicate that failure to observe can cause damage to
equipment. The terms
CAUTION, WARNING
and
DANGER
are used in conjunction with the Safety-Alert Symbol,
(a triangle with an exclamation mark), to indicate the degree of hazard for items of personal safety.
This Safety-Alert Symbol indicates a hazard and means ATTENTION!
BECOME ALERT! YOUR SAFETY IS INVOLVED!
Indicates an imminently hazardous situation that, if not avoided, will result in death or
serious injury.
Indicates a potentially hazardous situation that, if not avoided, could result in death
or serious injury, and includes hazards that are exposed when guards are removed.
Indicates a potentially hazardous situation that, if not avoided, may result in minor or
moderate injury.
Indicates that failure to observe can cause damage to equipment.
Indicates helpful information.
WARNING
CAUTION
IMPORTANT
NOTE
DANGER
Introduction
ii
15
Owner Service
WARNING
■
■
NEVER GO UNDERNEATH EQUIPMENT. Never
place any part of the body underneath equipment
or between moveable parts even when the
engine has been turned off. Hydraulic system
leak down, hydraulic system failures, mechanical
failures, or movement of control levers can cause
equipment to drop or rotate unexpectedly and
cause severe injury or death.
• Service work does not require going under-
neath.
• Read Manual for service instructions or have
service performed by a qualified dealer.
WARNING
The information in this section is written for opera-
tors who possess basic mechanical skills. If you need
help, your dealer has trained service technicians
available. For your protection, read and follow the
safety information in this manual.
■
■
Keep all persons away from operator control
area while performing adjustments, service, or
maintenance.
■
■
Before dismounting tractor or performing any
service or maintenance, follow these steps:
disengage power to equipment, lower all raised
components to the ground, operate valve levers
to release any hydraulic pressure, set parking
brake, stop engine, remove key, and unfasten
seat belt.
WARNING
■
■
Never use your hands to locate a hydraulic
leak. Use a piece of cardboard or wood. Hydraulic
fluid escaping under pressure can penetrate
skin. Openings in skin and minor cuts are sus-
ceptible to infection from hydraulic fluid. If
injured by escaping hydraulic fluid, see a doctor
at once. Gangrene and death can result. Without
immediate medical treatment, serious infection
and reactions can occur.
Replace any worn or damaged parts immediately.
Do not use attachment with any damaged parts.
Replace safety decals if damaged or missing.
Periodically lubricate the lockpin guides on the skid
steer latch with a good grade of grease.
Thoroughly clean the grease zerks before servic-
ing. Dirt mixed with lubricant will rapidly wear parts
and destroy bearings. Keep it clean.
Apply a few drops of oil to the other latch pivot
points.
Storage location should be level and solid to make
attaching and detaching easy. Store in a clean, dry
location away from children and livestock.
OWNER SERVICE
MAINTENANCE & STORAGE
