20127A
– CASSARA TEAK CLUB CHAIR
Page
2
of
4
PART LIST :
HARDWARE
TOLS NEEDED (INCLUDED) :
T1 . ALLEN KEY
NUMBER OF PEOPLE TO INSTALL :
T2 . PHILLIP HEAD SCREW DRIVER (Not Included)
RECOMMENDED 2 PEOPLE
ASSEMBLY TIME:
T3 .GLUE PACKET (Included)
APPROX 30 MINUTES
PRE ASSEMBLY INSTRUCTIONS :
1. Do not throw away packaging materials until the assembly is complete. Part might be accidentally thrown away.
ASSEMBLY INSTRUCTION:
STEP 1 :
1a.
Lay the Right End Frame , (a sticker on the seat base is attached to differentiate the 2 end frames) on the floor
facing up the holes, DETAIL 1. Use the packaging material to protect the End Frame against the floor. See Figure
1a
1b.
Attached the 3pcs of Allen Head Bolt (H1) and tighten it with the Allen Key (T1), DETAIL 2 see Figure 1b1c.
1c.
Align the Left End Frame's mortise hole(D), to the tenon of the Seat (B) and Back Rest(A) See Figure 1c, then
follow step 1b
Part #
Description
QTY
A .
BACKREST
1 PC
B .
SEAT
1 PC
C .
RIGHT END FRAME
1 PC
D .
LEFT END FRAME
1 PC
Part #
Description
QTY
H1 .
ALLEN HEAD BOLT M6 X 50
mm
6 PCS
H2 .
WOODEN SCREW, 25 mm
2 PCS
H3 .
WOODEN SCREW, 40 mm
2 PCS
H4 .
WOODEN PLUG
4 PCS
Figure 1a
C
B
T1
DETAIL 1
Sticker
"
RH
"
DETAIL 2
Figure 1b
Figure 1c
A
H1
D
Sticker
"
LH
"