Large
Hexagon
Wrench
Small
Hexagon
Wrench
(Fig. 11)
(Fig. 10)
S T E P 2 Umbrella Assembly
NOTE: Two-persons recommended for team lift and the rest of the assembly.
Attach the inverted plate to the rotating hub by tightening with the (4) plate bolts
(Fig. 8). Attach rotating hub (with inverted plate) to inverted base stem by tightening
with the (4) hub bolts and (4) washers (Fig. 9). Assemble main frame onto hub and
lower carefully. Insert the two bolts on bottom portion of main frame and tighten
using large hexagon wrench provided (Fig. 10). DO NOT OVER-TIGHTEN. Locate
the crank lift handle and install onto the crank mechanism located on the main
frame. Use the small hexagon wrench provided to lock in the small screw (Fig. 11).
REMOVE ALL PLASTIC PACKAGING MATERIAL FROM ALL PARTS PRIOR TO
OPENING UMBRELLA. CHECK UNDER CANOPY FOR PACKAGING AROUND
RIBS.
Your umbrella is now ready to operate!
S T E P 5 Closing Umbrella
To close umbrella, squeeze main frame grip handle (Fig. 17) and slide grip handle
down to closed position (Fig. 18) while turning crank handle counter-clockwise
(Fig. 19) until umbrella is closed (Fig. 20). Use ties to secure canopy to the main
frame when umbrella is not in use.
(Fig. 17)
(Fig. 18)
(Fig. 19)
(Fig. 20)
4
7
(Fig. 8)
(Fig. 9)
