REGULAR CARE AND MAINTENANCE
GENERAL FOUNTAIN INSTRUCTIONS
Fountains are frost-resistant up to -4°F (-20°C) but pump must be removed from fountain during freezing
temperatures. If fountain must be left outside and temperatures drop below -4°F (-20°C):
(1) Remove pump for storage indoors.
(2) Raise fountain base from ground with wood strips so that base will not freeze to the ground surface.
(3) Cover or wrap the fountain with burlap or other absorbent material (old blanket or towel) and then
cover securely with plastic, making sure that water will not accumulate in the basin or other fountain
component and freeze.
(4) Check fountain periodically to insure that plastic is secure and water is not accumulating in any fountain
component.
- G E N E R A L F O U N T A I N T I P S –
Install fountains on a level surface. You will need a properly grounded 110-volt (AC only) GFCI protected
receptacle near the fountain for your pump. Test all pumps and adjust to full output prior to assembly. It is
not recommended that fountains be placed directly on grass or dirt.
Frontgate
: Please contact one of our Product Specialists for assembly assistance or questions at:
1-800-537-8484 or email [email protected].
Specialists are available weekdays 8:00 a.m. to 8:00 p.m. EST or Saturday 9:30 a.m. to 6:00 p.m.