VACC023_REV_A01
© 2019 FRONT RUNNER VEHICLE OUTFITTERS
3
ASSEMBLY OF BRAAI / BBQ COOKING GRATE
2
2.2
2.3
2.4
2.1
2.1
2.2
TIP:
Use the spare wheel as a guide to adjust and position the Braai / BBQ cooking grate legs to the correct position.
For tyre diameters ranging from 740mm – 840mm ( 29”- 33”) the spacers are not required.
For tyre diameters ranging from 840mm ( 33”- 35”) the spacers must be used.
Secure the legs in place with items 4 and 5 using the 2 wrench’s provided in the cooking grate.
Test fit the assembled Braai / Cooking grate over the spare wheel to ensure it is set correctly. There should be a
slight resistance with the legs going over the tyre to ensure a proper and secure fit.
Should the resistance be too much, remove the legs and reposition to the next hole.
Reposition only one leg for a small increment, two legs for a bigger increment or all three legs.
NB: THE RESISTANCE SHOULD NOT BE EXCESSIVE, AS THIS MAY LEAD TO EXCESS STRESS IN THE LEGS.
If set correctly no additional strapping is required to secure the braai / cooking grate to the tyre,
but should the tyre tread be worn or tyre diameter not match up with the holes provided, an endless
ratchet strap may be used to secure the legs to the tyre and insure a secure fit. We suggest using the Front Runner
Spare Tire Mount Step with strap included. The strap must be placed in the legs recess to insure it does not slide off.
Cooking Gate secured to the tyre with
no additional strap.
Cooking Gate secured to the tyre with
additional ratchet strap.
