TBRA034_REV_A00
© 2021 FRONT RUNNER VEHICLE OUTFITTERS
5
FIT AND SECURE
3
2.7
2.8
2.9
If your vehicle has the cargo Rail fitted,
remove it by loosening and removing
the three bolts shown.
Remove the trim panel.
At the inside of the trim panel,
locate the two factory indicator punch marks.
Using a 5mm drill bit, drill pilot holes on
these marks. Open the holes with a 10mm
drill bit.
On the inside of the smaller top trim
panel, locate the two round bosses shown.
Using an 5mm drill bit, drill pilot holes in the
center of each boss. Widen the holes using
a 10mm drill bit.
punch marks
Bosses
10mm
5mm
10mm
