Front Runner SSDS602, Инструкция по монтажу, Страница: 4 / 7

SSDS602_REV_A00 © COPYRIGHT 2016 FRONT RUNNER VEHICLE OUTFITTERS 4
FIT AND SECURE 2
The rear support bracket is also part of
SSWS001. Fit and secure with the fasteners
supplied with SSWS001 as shown.
10MM
2.4
2.5
2.6
When fitting the Rear Corner Wing Brackets
(Item 12 & 13) take note of the position.
Item 12 & 13 needs to be placed on the
Drawer first, followed by the corner wing
supplied with SSWS001.
Use the fasteners supplied with SSWS001
to secure the wing brackets to the
Drawer System as shown.
Repeat this on the other rear corner of the
Drawer System.
Refer to the SSWS001 fitting instruction
to assemble the Wing Brackets before you
start to fit them to the Drawer.
After you have assembled the Wing
Brackets, fit them to the Drawer System
as shown.
Use the fasteners supplied with SSWS001.
Do the same on both sides of the Drawer
System.
10MM
4MM
10MM
Position First
Position Second