RRSTUNI_REV_A05
© 2019 FRONT RUNNER VEHICLE OUTFITTERS
4
RACK ASSEMBLY - COMBINED SLATS AND STANDARD SLATS
7
Nyloc Nut
3
3.1
3.2
3.3
Look at the Combined Slats and Standard
6ODWV,WHP DQGHQVXUHWKDWWKHUHLVD
Nyloc Nut inserted into each machined end
pocket. If the Nyloc Nut has fallen out
during shipping, insert it back into the
pocket as shown.
7XUQWKH&RPELQHG6ODW,WHPDQGWKH
6LGH3URğOH$VVHPEO\XSVLGHGRZQ(QVXUH
that the nut in the Combined Slat is at the
bottom. Push the one end of the Combined
6ODWLQWRWKH6LGH3URğOHDVVHPEO\DQG
align the holes.
8VHD0[%XWWRQ+HDG,WHPDQG
loosely tighten using a 5mm Allen Wrench.
Do the same with the second Combined Slat
RQWKHRWKHUHQGRIWKH6LGH3URğOH$VVHPEO\
7DNHD6WDQGDUG6ODW,WHPDQGDVZLWK
the Combined Slat, slide the one end into the
6LGH3URğOH$VVHPEO\DVVKRZQ(QVXUHWKDW
the nut is at the bottom.
8VHD0[%XWWRQ+HDG%ROW,WHP
and loosely fasten the Standard Slat to the
6LGH3URğOHXVLQJDPP$OOHQ:UHQFK
Repeat the process for the remaining
Standard Slats making sure that there
LVDQRSHQKROHLQWKH6LGH3URğOHLQEHWZHHQ
each slat.
7
9
7
8
7DNHWKHRWKHU6LGH3URğOH$VVHPEO\DQG
VWDUWLQJDWWKHRQHHQGSXVKWKH6LGH3URğOH
over the ends of the Combined Slat and
Standard Slats, aligning the holes and loosely
inserting the M8 x 25 Button Heads as you
work your way to the Combined Slat
at the other end.
8
5MM
5MM
