TBRA027_REV_A00
© COPYRIGHT 2016 FRONT RUNNER VEHICLE OUTFITTERS
3
16
FIT AND SECURE
2
2.1
2.2
2.3
3MM
5MM
8MM
3MM
5MM
8MM
Find a suitable position for the table.
Remove the trim panel if fitted. Mark
out the 4 fixing points, take care
that these points are not on or close to
bends in the bodywork or on
spot-welds.
If your vehicle has a rear door that
opens to the left side you need to
replace the right hand slide bracket
with the left hand slide bracket.
Do this by removing the nut caps and
loosening the fasteners shown.
If your vehicle has a rear door that
opens to the right side, move on to
Step 2.3.
Fit and secure the left hand slide
bracket (Item6) with the fasteners you
removed in Step 2.1.
Relocate the stopper screw to the right
side of the sliding table.
Refit the nut caps you removed in
Step 2.1.
Right Hand
Slide Bracket
Sliding Table
Left Hand
Slide Bracket
Stopper
Screw
Stopper
Screw
