Fronius Wattpilot Go 11 J 2.0, Руководство по эксплуатации

Страница: 38 / 72

Connecting the Wattpilot
General informa-
tion
CAUTION!
Installation and commissioning may only be performed by a qualified electri-
cian.
Requirements for the qualification of electricians - knowledge and observation of
the 5 safety rules for working on electrical systems.
▶
Disconnect.
▶
Ensure the device cannot be switched back on.
▶
Ensure the system is no longer live.
▶
Carry out earthing and short-circuiting.
▶
Cover nearby live components or make them inaccessible.
NOTE!
Check with the grid operator whether there is a duty to inform in the country of
destination and, if necessary, report the Wattpilot to the grid operator.
Installing the
Wattpilot Home When installing the Wattpilot Home 11 J 2.0 or Home 22 J 2.0, the mains cable
must be installed by a qualified person in accordance with national standards.
The fuse protection for the mains lead must be dimensioned in accordance with
the device technical data.
WARNING!
Danger from mains voltage!
An electric shock can be fatal.
▶
Always make sure the circuit is disconnected and de-energised before carry-
ing out any connection work.
▶
Have the connection work performed by an authorised electrical engineer.
▶
Observe the national standards.
2 2 2
1
Have the 5
‑
pin mains cable connected
by an authorised electrician in accord-
ance with national standards and
safety rules. Depending on the avail-
able mains supply type, opt for a 1- or
3-phase connection.
38