Fronius TransPocket 3500, Руководство по эксплуатации

Страница: 56 / 80

54
Rob TSt interface
Safety
Scope of supply
(1) ROB TSt interface
(2) LocalNet cable harness (1 m)
Device concept The ROB TSt interface is an automated and robot interface with analogue and digital in-
puts and outputs. It is designed for installation in an automated or robot control cubicle (can
also be surface-mounted).
Features:
-
Connection to power source via a standardised LocalNet interface
- No modification to power source necessary
- Analogue inputs and outputs for the transfer of process variables
- Therefore independent of the data processing bit width employed in the existing robot
control
- Easy to replace power source
- Simple plug connections
- Very little wiring required
- Mounted on DIN rail
- High degree of interference immunity during data transfer
- The power source is controlled by analogue set values
(0-10 V for welding current)
The robot interface is connected to the power source LocalNet connection by a 10-pin con-
necting lead.
The connecting lead is not included in the scope of supply and must be ordered separately.
A 1 m long LocalNet cable harness and a 10-pin connection socket are supplied with the
robot interface. The 10-pin connection socket is used as a bushing through the control cu-
bicle.
WARNING! Operating the equipment incorrectly can cause serious injury and
damage. Do not use the functions described until you have thoroughly read and
understood the following documents:
-
these operating instructions
- all the operating instructions for the system components, especially the safe-
ty rules
(2) (1)