42
Err | 056
Cause:
The "Wire-end check" option has detected the end of the wire electrode
Remedy:
Insert a new wirespool and feed the wire electrode into the hosepack;
acknowledge Err | 056 by pressing the Store button
Cause:
Additional fan filter of the VR 1500 - 11 / 12 / 30 is contaminated
air supply for the additional fan is no longer sufficient to cool the power elec
-
tronics
the power electronics temperature switch has tripped
Remedy:
Clean filter or replace;
acknowledge Err | 056 by pressing the Store button
Cause:
Excessive ambient temperature on the VR 1500 - 11 / 12 / 30
Remedy:
Reduce ambient temperature
if necessary position and operate welding machine at a cooler location;
acknowledge Err | 056 by pressing the Store button
Cause:
Excessive motor current on the VR 1500 - 11 / 12 / 30, e.g. due to wire feed
problems or an adequately dimensioned wire-feed unit
Remedy:
Check wire feed conditions, rectify errors;
acknowledge Err | 056 by pressing the Store button
Cause:
VR 1530 wire-feed unit cover open or interlock release handles not snapped
into place
Remedy:
Close VR 1530 wire-feed unit cover properly
acknowledge Err | 056 by pressing the Store button
Err |70.X
Cause:
Fault in digital gas sensor
Err 70.1 ... Gas sensor not found
Err 70.2 ... No gas
Err 70.3 ... Calibration error
Err 70.4 ... Solenoid valve faulty
Err 70.5 ... Solenoid valve not found
Remedy:
Check gas supply
Service codes
displayed in con
-
junction with the
digital gas control
option
no | GAS
Cause:
The “Gas watchdog” option has detected that there is no gas pressure
Remedy:
Connect a new gas cylinder and open the gas cylinder valve/pressure regu
-
lator;
Acknowledge no | GAS by pressing the Store button
Содержание KD 7000 D-11
