Fronius FK 2200, Руководство по эксплуатации

Страница: 20 / 36

20
Options
Installation kit
“flow controller“
with water filter
The optional flow controller with water filter controls the coolant flowrate during welding. If
an error with regards to the coolant flowrate occurs, the optional flow controller emits a sig -
nal. The power source switches off.
A coolant flowrate error can be caused by
- not sufficient coolant
- cooling circulation not vented sufficiently
- contaminated coolant
- leaks in the cooling circulation
- defective coolant pumps
- frozen coolant (operating temperature too low)
Installation kit
“temperature lim -
it controller“
The optional temperature limit controller controls the coolant temperature. If the tempera -
ture of the coolant is too high, the optional temperature limit controller emits a signal. The
power source switches off.