Fronius Datamanager Galvo, Руководство по установке

Страница: 12 / 76

10
(2) Connection LED
- lights up green: When there is an active connection within Fronius Solar
Net
- Lights up red: When there is an interrupted connection within Fronius Solar
Net
(3) IP switch
for changing the IP address:
A
Default IP address "169.254.0.180"
Fronius Datamanager uses the fixed IP address 169.254.0.180;
the fixed IP address is used for a direct connection to a PC via LAN
without first having to pre-configure the PC
B Assigned IP address
Fronius Datamanager operates using an assigned IP address (factory
setting 192.168.1.180);
The IP address can be set on the Fronius Datamanager web interface.
(4) WLAN LED
- Flashes green: Fronius Datamanager is in service mode (IP switch on the
Fronius Datamanager plug-in card is in position A)
- Lights up green: When there is an existing network connection
- Lights up red: When there is no existing network connection
- Does not light up: Plug-in card without WLAN
(5) Solar Web LED connection
- Lights up green: When there is an existing connection to Fronius Solar.web
- Lights up red: When there is no connection to Fronius Solar.web, but one
is required
- Does not light up: When no connection to Fronius Solar.web is required
(6) LAN connection socket
Ethernet interface colored blue for connecting the Ethernet cable
(7) I/Os
digital inputs and outputs
Digital inputs: I/O 0 – I/O 3, I 4 – I 9
voltage level: low = min. 0 V – max. 1.8 V; high = min. 3 V – max. 30 V
input currents: dependent on input voltage; input resistance = 46 kOhm
Digital outputs: I/O 0 – I/O 3
Switching capacity when supplied by the Datamanager plug-in card: 3.2 W,
10.7 V in total for all 4 digital outputs
Switching capacity when supplied by an external power supply with min. 10.7 –
max. 24 V DC, connected to Uint / Uext and GND: 1 A, 10.7 – 24 V DC (de-
pending on the external power supply) per digital output
The connection to the I/Os is made via the supplied mating connector.
(8) WLAN Antenna Socket with WLAN antenna
(only for versions with WLAN)
for connecting the WLAN antenna
No. Function