Fromm P356.0001.01, Руководство по обслуживанию

Страница: 2 / 34

CONVERSION PARTS
1-8
1.2 CONVERSION PARTS
When converting strap thickness or strap width the following parts must be exchanged:
16 x
0.65-1.05
16 x
1.06 -1.35
19 x
0.40-0.64
19 x
0.65-1.05
19 x
1.06-1.35
Holder P32.1228 P35.3210 P32.1228 P32.1228 P35.3210
Holder P32.1229 P35.3209 P32.1229 P32.1229 P35.3209
Strap guide P32.1246 P35.3212 P32.1724 P32.1724 P35.3213
Gripper P32.1719 P35.3206 P32.1716 P32.1719 P35.3206
Gripper P32.1720 P35.3207 P32.1717 P32.1720 P35.3207
Gripper P32.1721 P35.3208 P32.1718 P32.1721 P35.3208
Strap stop P32.1722 P32.1722 P32.1723 P32.1723 P32.1723
Tensioning body P35.0143 P35.0144 P35.0143 P35.0143 P35.0144
Tensioning wheel P35.3203 P35.3203 P35.3202 P35.3203 P35.3203
Guide pin P35.3216 P35.3216 P35.3218 P35.3218 P35.3218
Guide pin P35.3217 P35.3217 P35.3219 P35.3219 P35.3219
Attention!
When converting tools always change the item number on the type label.
Replace following parts:
Type label N42.9147
2 x hammer head bolts N2.4902
Enclose the suitable operation manual with the tool after each conversi-
on.
(see paragraph Ordering manuals)