14
P323mane.fm
8.2
Exchange of cutter, welding stop gripper and welding gripper
Disassembling
• Unscrew cover P32.1211 and remove it;
• Unscrew end cover P32.1726 and remove it;
• Remove security ring N2.1118 and pull handle shaft P32.1415 out of the tool.
This is loosening the lever P32.1414;
• Tilt down the handle lever P32.1212 and remove it from the tool;
• Don’t loosen screw N1.1553 at the coupler.
• Disassemble the security ring N2.1121 from the coupler, remove the coupler;
• Pull out the centering sleeve P32.1710 from the guide case to left, disassemble the guide case;
• Pull out the pressure spring with a screw driver from the cutter;
• Remove the cutter from the driving pin P32.1032;
• Disassemble the screws N1.1305, lift slightly the welding stop gripper and the steel insert and remove
them from the tool;
• Push the steel insert without welding stop gripper under the welding gripper P32.1511 until it touches the
parallel pin N2.2110;
• Press down lever P32.1906;
• Disassemble the safety ring N2.1121 from the bolt P32.1028, remove the bolt from the welding gripper;
• Press in coupler P32.1410 in order to release the lever P32.1906 again;
• Pull out the steel insert with care to right under the welding gripper;
• Disassemble the security rings N2.1121 from the driving pin P32.1032, remove the driver P32.1035 from
the driving pin;
• Lift the rocker P32.1510 behind the welding gripper with a screw driver, remove the welding gripper
together with the ball cage P32.1027 and the balls N3.1702 from the tool;
• Lower the rocker, remove the thrust piece P32.1029 from the tool.
P32.1212
P32.1415
N2.1121
P32.1035
➂
N2.1121
P32.1035
➂
N1.1904
N1.1929
N1.6503
P32.1211
P32.1710
Guide case
N2.1121
➂
Cutter
Pressure spring
P32.1028
➅
P32.1027
➄
6 x N3.1702
➄
Steeel insert
➁
N1.1305
N1.6504
P32.1511
➄
P32.1726
N1.1925
N1.6504
N2.1118
P32.1414
➂
P32.1032
P32.1410
P32.1906
➁
Loctite 222
➂
ESSO Beacon 2
➄
Klüber Isoflex Alltime SL2
➅
Klüber Isoflex NBU 15
P32.1029
➄
Welding stop
N1.1904
N1.6503
Coupler
gripper
WWW.TRADITIONALTOOL.COM
For Parts & Service 1-877-862-6699
