Pull out the Crown A to position (2). This will stop the movement.
Now use the crown to move the minute hand a few minute-strokes
beyond the time to be set. Then position the minute hand by mo-
ving it gently backward until it is precisely above the correct minute
stroke. This ensures that the minute hand begins to run immediately
when you restart the movement. Push the crown back into position
(0) to activate the watch.
TIME SETTING
Pull the Crown A out to position (1) to stop the watch. Turn the
crown clockwise to adjust the date. Once done, push the crown
into position 0 to ‘lock’ the watch and activate it once again.
DATE SETTING
With the Crown B in the normal position (0), your Twin Time is ‘loc-
ked’ from an accidental adjustment of your hour and minute. The
crown must always be in position 0 when you are wearing your
watch.
CROWN B : NORMAL POSITION
Pull out the Crown B to position (1).
Now use Crown B to move the minute hand a few minute-strokes
beyond the time to be set. Push the crown back into position (0) to
activate the watch.
TWIN TIME SETTING
