Fröling T4e Скачать руководство пользователя страница 44

Страница: 44 / 76

4.4.13 Lock display/switch user level

For safety reasons individual parameters are only visible at specific operating levels.
To change to another level it is necessary to enter the relevant user code.

❒ Tap on the icon for the user level in the upper area of the basic display and enter

the code.

User level

Icon

Description

Lock

(Code “0”)

At “Lock” level, only the basic display appears. It is

not possible to change parameters.

Customer

(Code “1”)

Standard user level for normal operation of the

controller. All customer-specific parameters are

displayed and can be changed.

Installer

Releases parameters to adjust the controller to the

system components (if configured). All parameters

are available.

Service

4.4.14 Change the name of the components

The names of the DHW tank, storage tank and heating circuits can be freely selected.
A maximum of 20 characters are available for the name.

❒ Navigate to the “System” menu and open the “Renaming” sub-menu

❒ Tap the desired component and use the keyboard to rename it

Operating the System

Operate the boiler using the touch display

Froling GesmbH | A-4710 Grieskirchen, Industriestraße 12 | www.froeling.com

Содержание T4e













































































Результаты поиска

Содержание T4e

Отзывы:

Похожие инструкции для T4e

Бренды по названию

Популярные бренды

Fröling T4e, Руководство по эксплуатации

Результаты поиска

Содержание T4e

Отзывы:

Похожие инструкции для T4e

Бренды по названию

Популярные бренды