2
SETUP
Unpacking and inspection
Immediately upon receiving the machine, carefully unpack the carton, check all content to ensure that all
parts are present and have been received in good condition. If any parts appear damaged or mishandled
from shipping, please do not power on the machine. Contact the manufacturer for further instruction.
What is included:
1. 1 x H2 Haze machine and Hanging Bracket
2. 1 x Power Cord
3. 1 x W-4 Wireless Remote Controller
4. 1 x User Manual
Installation
1. After ensuring all the accessories are intact, position the machine on a flat
2. Press the fluid tank’s quick connector by thumb and forefinger, and take it out quickly to disconnect the
tube and the fluid tank. Take out the tank and uncover the cap. Pour water based haze machine liquid into
the tank carefully, then tighten the cap. Put the tank into the machine and push the connector lightly to
connect the tube and fluid tank.
3. Connect the Neutrik power cord to the machine. Please make sure the required and provided electricity
voltage and the electricity outlet is grounded.
4. Upon activating the power switch, the unit will immediately start heating up in the standby mode, during
this time, the LCD panel will display “HEAT”
