![Froggy's Fog Fobbles F2 Скачать руководство пользователя страница 2](http://html1.mh-extra.com/html/froggys-fog/fobbles-f2/fobbles-f2_user-manual_2338671002.webp)
2
MAINTENANCE
Cleaning your fog bubble machine regularly will help reduce costly parts replacement and repair charges.
Please follow these instructions for safely cleaning after 40 hours of operation or before storing the fog bubble machine, to ensure long
lifespan. Tools: Clean lint free cloth, coffee filter or similar fine mesh filter cloth, plastic or glass container larger than the reservoir size (do not
use metal), distilled water and Froggys Fog fluid.
1.
Allow the machine to cool down enough to be able to handle.
2.
Drain any fog solution that remains in the tank, through the filter, into the container. You may need to pour out the solution in steps depending
on the filter mesh.
3.
Add distilled water to fill the machine reservoir approximately 1/3.
4.
Run machine for 10 minutes. Fog will come out the first few cycles, followed by distilled water vapor.
5.
Turn off smoke machine and allow to cool down, then drain the distilled water from the reservoir.
6.
Refill the reservoir approximately 1/3 with good quality fog solution.
7.
Turn smoke machine on, run for 10-15 minutes. Distilled water vapor will come out the first few cycles, followed by fog. Allow steam to come
out of the machine for 5-10 cycles.
8.
Turn off machine and allow to cool, then wipe machine clean with clean lint free cloth.
9.
Leave the fog solution in the reservoir. The fog solution acts a lubricant and conditioner for the plastic and rubber parts in the fluid pump.
10.
Store the smoke machine in a cool, dry place when not in use. Avoid freezing temperatures, high heat above 120 degrees and humid/damp
locations which may cause control board failure.
11.
If possible, remove from storage after 6 months and operate the smoke machine for 15 minutes or more, then repeat step 8 – 10.
SAFETY WARNINGS
•
Under normal use, bubble solution can build up on surfaces beneath and in front of the machine. Exercise care during use to avoid slipping hazards.
•
Keep this device dry. The unit may be used outdoors, but must be shielded from inclement weather. Turn off or unplug when not in use.
•
Use 3-prong grounded electrical outlet only. Prior to use take care to determine that the unit is installed at the rated voltage.
•
Always unplug your fog machine before filling its tank.
•
Keep fog machine upright on a level surface or hang from bracket at no greater than 15-degree angle.
•
The machine is not waterproof or splash proof. If any moisture gets inside the housing, immediately unplug and contact a service technician or your
dealer before using it again.
•
No user serviceable parts inside. Refer to your dealer or other qualified service personnel.
•
For adult use only. Fog machine must be installed out of the reach of children. Never leave the unit running unattended.
•
Never point the nozzle directly at people. Fog machine output is very hot (300 degrees C).
•
Locate the fog machine in a well-ventilated area. Never cover the unit’s vents. Provide adequate ventilation and allow free air space of at least 6”
around the sides and top.
•
Only specifically designed water based scent additives may be added to the fog and bubble fluid. Never add flammable liquids of any kind (oil, gas,
non-application specific perfumes). Pay attention to all warning labels and instructions printed on the exterior of your machine.
•
Use only the high quality, Froggys Fog, water based fog fluid in the machine. Always make sure there is sufficient liquid in the fog liquid tank.
Operating this unit without liquid will cause damage to the pump and or heater.
•
Always drain tank before mailing or transporting this unit.
•
Never drink fog liquid. If it is ingested, call a doctor immediately. If fog liquid comes in contact with skin or eyes, rinse thoroughly with water.
•
Vapor from this fluid may be irritating to some persons with allergic sensitivity. Do not expose at close range to known asthmatic. Use in a well-
ventilated area.
Save these instructions. 90 Day Limited Warranty: valid from the date of purchase. 90-day limited warranty covers manufacturing defects
only. Serial number, place of purchase with dated valid receipt must be submitted at time of service. Warranty does not cover items or parts
prone to wear and tear: pumps, fuses, switches and cords. Warranty is only valid with-in the United States.