- 5 -
3
O
PERATION
3.1
LCD
C
ONTROL
P
ANEL
LCD controller only works when DMX control is disconnected.
All functions are unavailable except DMX channel setting when DMX is connected.
Four Buttons of LCD control:
"MENU”:
Press to Change Menu Screen/Options
"UP":
Increase/ “TIMER”
"DOWN":
Decrease/ “VOLUME”
"ENTER":
Enter/Exit/Stop
Press
“MENU”
button, there are 10 screens/options:
“Ready to Snow”
- Indicates the machine is ready to operate
"Manual Volume Snow Output"
- Setting of the snowflake output under VOLUME mode (the range is from 1% to 100%)
"Manual Volume Fan Speed"
- Setting of fan volume (the range is from 1% to 100%)
"Timer Interval"
- When using Timer Function, Length of time between snowmaking sessions (the range is from 5 to 600
seconds)
"Timer Duration"
- When using Timer Function, Length of time to actively make snow (the range is from 5 to 300 seconds)
"Timer Snow Volume"
- When using Timer Function, setting of the snowflake volume output under the TIMER mode (the range
is from 1% to 100%)
"DMX512 Address"
- Setting of DMX channel
"Fluid Sensor"
- Setting of no-fluid protection, press ENTER button to save after choosing ON/OFF setting
"Wireless Set"
- Setting of the wireless remote control, press ENTER button to save after choosing ON/OFF setting
"Remember Timer Settings"
- If this is ON, when user turns off the machine and powers on gain, it will conduct the timer mode
directly. After setting, press ENTER button to save.
Notes:
Under any setting pages, press STOP to exit or return to the first screen.
When the unit is working, press STOP to stop running and return to the first screen.
After enter into different setting pages, press UP and DOWN to change the value.
When it is in the first screen, press TIMER button to enter into timer mode directly. The snow output can be adjusted through
Timer Interval, Timer Duration and Timer Snow Volume.
Press VOLUME button directly to let the unit work. At this time, snow output can be adjusted through the Manual Volume Snow
Output and Manual Volume Fan Speed.
3.2
DMX
C
ONTROL
After receiving DMX signal, LCD display only shows the DMX512 address page. User can change the DMX512 address freely.
Содержание BOREAS C6
Страница 1: ...USER MANUAL...
