FROGGYS FOG Fire Base 1300 Cased, Руководство пользователя

Страница: 10 / 12

10 Trouble-Shooting
The SG-1300 does not fog
• Check external control signals
• Check mains supply
• Check fluid tank (empty?)
• Check for correct connections at the fluid bottle
• Check for fluid in the fluid tube
• Check if fluid filter is clogged
The SG-1300 fogs uncontrollably
• Check mains supply
• Check unit for moisture (moisture inside the machine, especially on the PCB can cause
fogging)
The SG-1300 switches off suddenly
• The “Temperature cutout” has switched off due to overheating. Remove external heat
source (for instance projector shining right onto the housing) and/or make sure sufficient fresh air
supply. After 15 to 30 minutes the unit should switch back to “on” again.
Loud droning sound during fogging
• The pump is running dry. Avoid this absolutely!
• Refill fluid bottle
• Double check connection fluid tube and fluid bottle.
E-4 appears on the LED display
• The machine is getting too hot. The heating switches off and the machine cools down.
Solution: Disconnect the machine from the main supply for a moment and then re-connect it.
E-1/E-2/E-3 appears on the LED display
•
Please send the machine to the service-station or your local dealer.