11
B.
Setup the Wi-fi Console to transmit weather data to
wunderground.com
1 . When you plug the adaptor into the DC jack to power up the Wi-fi console during the first
time start up, or press and hold the [ Wi-Fi / SENSOR ] key for 6 seconds in normal mode,
the Status LED on the main console will flash green light to signify that it has entered into
the AP mode, in which the console is ready for the Wi-fi setup.
2 . Use your Wi-
fi enabled smart phone or computer device to directly connect to the console’s
SSID:
PWS-XXXXXX
.
3 . Once connect, open the internet browser and enter
192.168.1.1
into the URL blank, then
press the
Enter
key to access the console’s setup interface.
Note:
- Since different web browsers are slightly different, please make sure you enter the
192.168.1.1
in the URL blank .
4 . Fill in the connection information for the setup interface . Your PWS will base on this
information to connect the Wi-fi router.
Note:
- Depending on your web browser, the layout of the setup interface will be a bit different .
- To find your latitude and longitude, visit Google Maps and directly click on the location that
you want to check and the latitude and longitude will be shown (negative value of latitude
represents South, negative value of longitude represents West) .
Language:
