Froggit DP60, Руководство пользователя

Страница: 12 / 28

12
Flash (for 2S): Indicates detection of noise
signals, prompting the user that current location
has high level noise. You can either set dip
switch 3, 4 to mid or low sensitivity level which
raised to a higher threshold level for noise
filtering, or you can find another location for
lower noise level.
Steady on (for 2S): Indicates detection of
interference signals. It means there is lightning
like signals around. You should try to find
interference sources like motor, switches for all
kinds electrical appliances, and place the sensor
far away from these interference sources.
Steady Off : Indicates no triggering of lighting
signal neither noise, nor interference.