Put the matching bit into the holder of the
torque wrench. Release the clamping
bolts of the stem faceplate and remove
the faceplate.
Open the FRM assembly paste. Squeeze
out some assembly paste and apply a thin
layer of carbon assembly paste on the
inner side of the faceplate as well as in the
clamp- ing area of the stem body.
Position the handlebars by means of the
marking accurately centred in the stem
clamp. Make sure the bowden cables and
the lines are not twisted or bent, but run in
a smooth curve to the cable stops or
brakes.
Retighten the clamping bolts of the face-
plate evenly in a cross pattern until they
lightly hold the handlebars in place.
MOUNTING THE FRONT WHEEL
MOUNTING VOLATA
AERO SEAT POST
Remove the front wheel from the protec-
tive cardboard and from the wheel bag, if
available.
1
Remove the front wheel axle already
mounted on the fork.
Remove the plastic spacer from the
caliper, being careful not to operate the
brake lever. (01)
2
Mount the front wheel and make sure the
disc is centered between the pads.
Insert the axle from the right and tighten it
according to the recommended torque.
After the wheel mounting, do a brake
test when stationary. Actuating the
brake lever should generate a clear-cut
braking response before the lever
touches the handlebars.
When using a box cutter make sure
you do not damage the component or
injure yourself. Make it a rule to cut
away from yourself and the component!
Do not pull the (disc) brake lever with a
removed wheel and make sure to
mount the safety locks when re-
moving the wheel.
R I D E I N S T Y L E
1
4
3
2
Tightening sequence
MAX. 5Nm
Apply a little FRM assembly paste on the
bottom part of the seat post and inside the
seat tube.
You should be able to insert the seat
post easily into the frame without press-
ing or turning. If you are not, loosen the
built-in seat post clamp.
Pull the seat post out again. Apply a
little FRM assembly paste to the bottom
part of the seat post and inside the seat
tube or in the clamping area of the seat
post.
Содержание VOLATA
Страница 1: ...RIDE IN STYLE User s manual...
