FRITZ!Box Fon WLAN 7570 vDSL
76
Displaying the Incoming Caller ID (CLIP)
Displaying the Incoming Caller ID (CLIP)
The CLIP (Calling Line Identification Presentation) function
makes the number of callers—external and internal—visible
on your telephone display.
The CLIP function is enabled in the factory settings. This
function can be permanently disabled and enabled again.
Connected ISDN Line Identification Restriction and
Presentation (COLR/COLP)
By default, a caller’s display always shows the Multiple
Subscriber Number (MSN) of the extension she or he di-
aled. Yet if you take the call at another extension, the MSN
of this extension will be displayed (see page 82). If you do
not want the caller to know that the call has been picked up
at another extension and thus wish this number to remain
concealed, you have the option of suppressing transmis-
sion of the connected line’s number. The caller’s display
will continue to show the number that was actually dialed.
This feature is only effective if your telephone supports
CLIP.
Enable Display of Incoming Caller ID (CLIP)
N
Pick up the handset.
r50
<Ext.>
s1s
Dial the sequence shown at left.
r91ss
Save your settings if desired by dialing the
sequence shown at left.
O
Hang up the handset.
Disable Display of Incoming Caller ID (CLIP)
N
Pick up the handset.
r50
<Ext.>
s0s
Dial the sequence shown at left.
r91ss
Save your settings if desired by dialing
the sequence shown at left.
O
Hang up the handset.
