Connecting Wirelessly Using the Configuration Wizard
FRITZ!WLAN Repeater DVB-C
17
4.2
Connecting Wirelessly Using the Configuration Wizard
If you cannot use WPS, establish the wireless connection us-
ing the configuration wizard.
The configuration wizard is started in the web browser.
Requirements
•
The “WLAN Bridge” operating mode must be set in the
FRITZ!WLAN Repeater (preconfigured upon delivery of
the FRITZ!WLAN Repeater).
•
DCHP must be enabled on the computer; see
.
•
The SSID (radio network name) of the wireless access
point must be set to “visible” (announced).
•
If the MAC address filter of the wireless access point is
enabled, the MAC address of the FRITZ!WLAN Repeater
must be entered as an exception.
Establishing a Wireless Connection
1.
Connect the FRITZ!WLAN Repeater to an electrical outlet
in the vicinity of the FRITZ!Box.
2.
Connect the FRITZ!WLAN Repeater to a computer using
the network cable included with delivery.
3.
Start a web browser on the computer.
4.
Enter the address
The configuration wizard starts.
In the presettings of the latest FRITZ!Box models the SSID is
visible and the MAC address filter is disabled.
